Challenger Boat Glass Windshield 76901045000 | 104 Inch Aluminum (3PC)
Boat part number 1010604 is a new 3-piece glass windshield for Challenger Boats, part number unavailable.
made for Challenger Boats
$1,495.00 MSRP: $2,963.25
GLS Stock #: 1010604-4N213
Only 2 left
Boat part number 1010604 is a new 3-piece glass windshield for Challenger Boats, part number unavailable. Manufactured by Taylor Made, part number 76901045000 .
This windshield is constructed out of aluminum and light green tinted glass. It measures approximately 104" W (tip to tip) x 12 3/8" H x 81" D overall. The walkthrough center windshield measures approximately 21" W x 25" H overall. See photos for additional measurements.
Note: May contain minor scuffs and scratches.
Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.
Specifications:
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
This windshield is constructed out of aluminum and light green tinted glass. It measures approximately 104" W (tip to tip) x 12 3/8" H x 81" D overall. The walkthrough center windshield measures approximately 21" W x 25" H overall. See photos for additional measurements.
Note: May contain minor scuffs and scratches.
Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.
Specifications:
- Boat Manufacturer: Challenger
- Model/Year: Unavailable
- Part Number: Unavailable
- Part Manufacturer: Taylor Made
- Part Number: 76901045000
- Material: Aluminum / Glass
- Color: Silver
- Tint: Light Green
- Overall Dimensions: 104" W x 12 3/8" H x 81" D
- Across Back, Tip to Tip: 104"
- Depth (Front to Back): 81" D
- Inner Front Width (Center of Curve to Center of Curve): 69 1/2" W
- Height: 12 3/8" H
- Walkthrough Center Door: 21" W x 25" H
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Do you guys make or sell the center window by itself?
Question by: Alex Merida on Jul 10, 2023, 9:20 AM
Hello Alex,
I'm afraid we don't have that center section on it's own, and it's not something we can source or order. (we don't make them)
Sorry we could not help.
Gene
I'm afraid we don't have that center section on it's own, and it's not something we can source or order. (we don't make them)
Sorry we could not help.
Gene
Answer by: Admin on Jul 10, 2023, 11:35 AM
Hi, i have Bayliner model 205 BR, i need the windshield but only the driver side, right side, can you please help me?
Question by: Ramona on Mar 26, 2023, 3:50 AM
Hello Ramona,
We typically only carry complete windshields, along with some select center walk through's and only the occasional "section."
Unfortunately, we don't currently show one specific to your 205 and it isn't something we can source/order.
I'm afraid we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://i.ebayimg.com/images/g/6rAAAOSwv0VimObt/s-l500.jpg
The single most important measurement is the 82". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
We typically only carry complete windshields, along with some select center walk through's and only the occasional "section."
Unfortunately, we don't currently show one specific to your 205 and it isn't something we can source/order.
I'm afraid we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://i.ebayimg.com/images/g/6rAAAOSwv0VimObt/s-l500.jpg
The single most important measurement is the 82". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Mar 27, 2023, 10:31 AM
I'm trying to find a windshield like this for a 2005 sea doo challenger 180. Will this fit or can you recommend a product?
Question by: Joel E. Gothel on Sep 6, 2022, 5:47 PM
Hello Joel,
Unfortunately, we don't currently show one specific to your 180 and it isn't something we can source/order or cross reference to what we do have.
Going back to '05, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/a/b/ab56734c7d4cd1a6ff45175ff465b4da.jpg?optimize=low&bg-color=255,255,255&fit=bounds&height=700&width=700&canvas=700:700
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your 180 and it isn't something we can source/order or cross reference to what we do have.
Going back to '05, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/a/b/ab56734c7d4cd1a6ff45175ff465b4da.jpg?optimize=low&bg-color=255,255,255&fit=bounds&height=700&width=700&canvas=700:700
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Sep 7, 2022, 9:31 AM