Faria Boat Speedometer Gauge SE9390A | Four Winns 65 MPH 3 1/4 Inch
Boat part number 1040246 is a new 65 MPH Signature Gold style speedometer from Faria, part number SE9390A
made for Four Winns Boats
$49.95 MSRP: $67.49
GLS Stock #: 1040246-FH522
39 in stock
Boat part number 1040246 is a new 65 MPH Signature Gold style speedometer from Faria, part number SE9390A . Custom made for Four Winns Boats, part number unavailable.
This illuminated speedometer features a domed lens, gold colored bezel, gray face, white needle, and black graphics with gold accents. Features the Four Winns wave logo on the face.
Measures approximately 3 3/4" across the face including bezel. Requires an approximate 3 1/4" Dia. cutout. Connects with Pitot and (2) spade male. Mounting bracket included.
Specifications:
This illuminated speedometer features a domed lens, gold colored bezel, gray face, white needle, and black graphics with gold accents. Features the Four Winns wave logo on the face.
Measures approximately 3 3/4" across the face including bezel. Requires an approximate 3 1/4" Dia. cutout. Connects with Pitot and (2) spade male. Mounting bracket included.
Specifications:
- Boat Manufacturer: Four Winns
- Part Number: Unavailable
- Part Manufacturer: Faria Beede
- Part Number: SE9390A
- Series: Signature Gold
- Colors: Gold (Bezel) | Gray (Face)
- Overall Dimensions: 3 3/4" Dia.
- Cutout: 3 1/4" Dia.
- Connections: Pitot | (2) Spade Male
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
Product Questions
How do I remove the speedometer cable from the old speedometer ( the old one is a Faria, just like this one).
Also, does this one come with the pitot and cable? Thanks.
Also, does this one come with the pitot and cable? Thanks.
Question by: Gary Powell on Feb 24, 2022, 4:53 PM
Hi Gary,
There should be a clamp holding the hose to the pitot tip on the gauge, but even if you remove that clamp, you'll most likely need to cut it off that pitot tip with a knife. It doesn't include any pitot tube or pick up, but we do have them available at this link:
link: https://www.greatlakesskipper.com/boat-gauges-and-electronics/individual-gauges/speedometer-pick-ups
Hope this helps!
Gene
There should be a clamp holding the hose to the pitot tip on the gauge, but even if you remove that clamp, you'll most likely need to cut it off that pitot tip with a knife. It doesn't include any pitot tube or pick up, but we do have them available at this link:
link: https://www.greatlakesskipper.com/boat-gauges-and-electronics/individual-gauges/speedometer-pick-ups
Hope this helps!
Gene
Answer by: Admin on Feb 25, 2022, 8:41 AM